Strong Nickel Alloy tubes are used for temporary connection of two components. The joint is rendered without any damage to external items; therefore, disassembly is much simpler. Such high nickel alloy tubes allow better non-permanent toughening joints. It is used in extreme applications where stresses can be kept to a minimum without leakages. High Nickel Alloy Tubes is a commercially available pure wrought nickel with designation UNS N02200. This has outstanding technical characteristics and good resistivity against many adverse conditions. It has many features, suitable for industrial applications such as magnetic forces, low gas content and high thermal conductivity , and low vapor density. It has a strong composition of alloying elements which makes it immune to a wide range of adverse environments. This classification has a strong potential for treating most extreme chemicals and is often found in organic and inorganic substances.
Implementations of High Nickel Alloy Tubes Fastener are used in various sectors, such as the heat exchanger industry. The High Nickel Alloy Tubes are commonly used to produce spinning hollowware and decoration objects. The Heavy Nickel Alloy Tubes are also seen in some of its applications by finished goods firms.
HIGH NICKEL ALLOY TUBE SPECIFICATION
|ASTM / ASME SB 163 / 165 / 167 / 464/ 515 / 619 / 622 / 626 / 704 / 705.
|1/8″ NB TO 24″ NB
|6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock
|High Nickel Alloy Tubes Manufacturing Shapes
|Hydraulic, Round, Rectangle, Square, Hex, Honed
|Normalized & as Rolled
|Normalized, Normalized & Tempered
|High Nickel Alloy Tube Schedule Thickness Range
|SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
|High Nickel Alloy Tubes End Types
|Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends)
|Value Added Services
|Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing
|Inspection and Test Reports
|EN 10204 3.1, Mill Test Certificates, Chemical Reports, PMI Test Reports, Mechanical Reports, Third Party Inspection, NABL Approved Lab, Visual Inspection, Destructive Test and Non Destructive Test Reports
|Specification Grade Nominal Tube Sizes Tube Schedule or Wall Thickness Manufacturing Method (Seamless / Welded) Heat Number Manufacturer’s Name or Custom Logo – on request Marked Tube Sample: ANSI B36.19 ASTM B 165 12″ NB SCH 40S SEAMLESS HEAT NO. XXXX
|Packing of High Nickel Alloy Tubes
|Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
|Sizes and Specifications other than above can be on request